Analysis (density and porosity analysis) from sample
| Method | density and porosity analysis |
| Person/Institution | Shogenova, Alla |
| Remarks | Density and porosity were determined using the water saturation method. For density measurements samples were dried at a temperature 100110 °C and the weight of dry samples (Pd) was determined. Then the samples were saturated with water for 7 days and after that weighed in air (Pw) and water (Pww). From the obtained measurements the following parameters were calculated: dry density = Pd/V = Pd/(Pw Pww), where V represents sample volume; wet density= Pw/(Pw Pww); grain density= Pd/(Pd Pww); effective porosity = (Pw Pd)/(Pw Pww). Research Institute of Earths Crust of St, Petersburg University (Russia) |
| Reference | Shogenova et al., 2003b |
| Dataset | Geochemistry and petrophysics of the Ruhnu core |
| Locality | Ruhnu 500 borehole |
| Depth | 223.5 |
| Stratigraphy | Kuressaare Stage |
| Lithostratigraphy | Tahula Beds |
| Institution | Department of Geology, TalTech |
| Date added | 2013-10-28 |
| Date changed | 2014-01-10 |
Browse Geocollections
Partners
